|
| |
 |
 |
 |
| |
Gupta N. and Hunt W. H. (Editors).
Proceedings of the symposium “Solidification Processing of Metal Matrix Composites”,
TMS Annual Meeting-2006, March12-16, 2006,
ISBN:978-0-87339-625-7. San Antonio, TX.
|
|
|
 |
 |
 |
|
|
|
|
|
|
| |
Journal Articles
| Publication |
Pre-Print Version |
Published Version |
1. Vinyl ester-glass hollow particle composites: dynamic mechanical properties at high inclusion
volume fraction. Tagliavia, G., Porfiri, M., and Gupta, N. 2008, Manuscript submitted to Journal
of Composite Materials.
|
Click Here |
Click Here |
2. Processing and compressive properties of aerogel/epoxy composites. Gupta, N. and Ricci, W.
Journal of Materials Processing Technology, Vol. 198, No. 1-3, 2008, pp. 178-182.
|
Click Here |
Click Here |
3. Analysis of a functionally graded particulate composite under flexural loading conditions. Gupta,
N. Gupta, S. K. and Mueller, B. J. Materials Science and
Engineering A, vol.485, No.1-2, 2008.
pp.439-447
|
Click Here |
Click Here |
4. Blind multiridge detection and reconstruction of ultrasonic signals for nondestructive evaluation. Wu,
H. C, Katragadda R., Gupta, N. and Mylavarapu, P. Manuscript submitted to IEEE Transactions on
Ultrasonics, Ferroelectrics, and Frequency Control.
|
Click Here |
Click Here |
5. Synthesis and processing of cast metal matrix composites and their applications. Rohatgi, P.
K., Gupta, N. and Daoud, A. Manuscript of the chapter submitted to ASM Handbook Vol. 15.
|
Click Here |
Click Here |
6. Thermal stability of epoxy matrix-glass microballoon syntactic foams. in, T. C., and Gupta,
N. Manuscript submitted to Journal of Materials Science, 2008.
|
Click Here |
Click Here |
7. Effect of volume fraction and wall thickness on the elastic properties of hollow particle filled
composites. Porfiri, M., and Gupta, N. Manuscript submitted to Composites Part B,
2008.
|
Click Here |
Click Here |
8. Thermal conductivity of multi-phase particulate composite materials Porfiri, M., Nguyen, N. Q. and
Gupta, N. Manuscript submitted to Journal of Materials Science,
2008.
|
Click Here |
Click Here |
9. Whispering gallery mode-based micro-optical sensors for structural health monitoring of composite
materials. Nguyen, N. Q., Gupta, N., Ioppolo, T. and Otugen, M. V. Manuscript submitted to Journal
of Materials Science, 2008.
|
Click Here |
Click Here |
10. Characterization of vinyl ester-glass microballoon syntactic foams for marine applications. Gupta,
N., Ye, R. and Porfiri, M. Manuscript submitted to Composites Part A,
2007.
|
Click Here |
Click Here |
11. Solidification processing of metal-matrix nanocomposites. Rohatgi, P. K., Schulz, B. F. and
Gupta, N. Manuscript submitted to International Materials Reviews,
2008.
|
Click Here |
Click Here |
12. Impact properties of syntactic foams and effect of microballoon wall thickness. Lin, T. C. and Gupta,
N. Manuscript under preparation for Materials and Design.
|
Click Here |
Click Here |
13. A functionally graded syntactic foam material for high energy absorption. Gupta, N. Materials
Letters, Vol. 61, No. 4-5, 2007, pp. 979-982.
|
Click Here |
Click Here |
14. Clay/epoxy nanocomposites: processing and mechanical properties. Gupta, N., Lin, T. C. and
Shapiro, M. JOM, Vol. 59, No. 3, 2007, pp. 61-65.
|
Click Here |
Click Here |
15. Comparison of compressive properties of layered syntactic foams having gradient in microballoon
volume fraction and wall thickness. Gupta, N. and Ricci, W. Materials Science and Engineering A.
Vol. 427, No. 1-2, 2006, pp. 331-342.
|
Click Here |
Click Here |
16. Blind multiridge detection for automatic non-destructive testing using ultrasonic signals. Wu, H.
C, Gupta, N. and Mylavarapu, P. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency
Control. Vol. 53, No. 10, 2006, pp. 1902-1911.
|
Click Here |
Click Here |
17. Comparison of compressive properties of layered syntactic foams having gradient in microballoon
volume fraction and wall thickness. Gupta, N. and Ricci, W. Materials Science and Engineering A.
Vol. 427, No. 1-2, 2006, pp. 331-342.
|
Click Here |
Click Here |
18. Investigation of flexural strength properties of rubber and nanoclay reinforced hybrid syntactic
foams. Maharsia, R., Gupta, N. and Jerro, H. D. Materials Science and Engineering A, Vol. 417,
No. 1-2, 2006, pp. 249-258.
|
Click Here |
Click Here |
19. Compressive characteristics of A356/hollow fly ash particle composites made by pressure
infiltration technique. Rohatgi, P. K., Kim, J. K. Gupta, N., Alaraj, S. and Daoud A. Composites Part
A, Vol. 37, No. 3, 2006, pp. 430-437.
|
Click Here |
Click Here |
20. On the tensile properties of glass microballoon-epoxy resin syntactic foams. Gupta, N. and
Nagorny, R. Journal of Applied Polymer Science, 2006, pp. 1254-1261.
|
Click Here |
Click Here |
21. Squeeze Infiltration processing of nickel coated carbon fiber reinforced Al-2014 composite.
Rohatgi, P. K., Tiwari, V. and Gupta, N. Journal of Materials Science, 2006, Vol. 41, No. 21, 2006,
pp. 7232-7239.
|
Click Here |
Click Here |
22. Symposium Review: Solidification Processing of Metal Matrix Composites - Rohatgi
Honorary Symposium. Gupta, N. and Satyanarayana, K. G. JOM, Vol. 58, No. 11, 2006, pp. 91-93.
|
Click Here |
Click Here |
23. Applications of fly ash in synthesizing low cost metal matrix composites for automotive and other
engineering applications. Rohatgi, P. K., Weiss, D. and Gupta, N. JOM, Vol. 58, No. 11, 2006,
pp. 71- 76.
|
Click Here |
Click Here |
24. Characterization of mechanical and electrical properties of epoxy-glass microballoon syntactic
composites. Gupta, N., Priya, S., Islam, S. and Ricci, W. Ferroelectrics, Vol. 345, 2006,
pp. 1-12.
|
Click Here |
Click Here |
25. Thermal expansion of aluminum/fly ash cenosphere composites synthesized by pressure infiltration
technique. Rohatgi, P. K., Gupta, N. and Alaraj, S. Journal of Composite Materials, Vol. 40, No. 13,
2006, pp. 1163-1174
|
Click Here |
Click Here |
26. Enhancement of energy absorption characteristics of hollow glass particle filled composites by rubber
addition. Gupta, N., Maharsia, R. and Jerro, H. D. Materials Science and Engineering A, Vol. 395,
No. 1-2, 2005, pp. 233-240.
|
Click Here |
Click Here |
27. Enhancement of energy absorption in syntactic foams by nanoclay incorporation for sandwich core
applications. Gupta, N. and Maharsia, R. Applied Composite Materials, Vol. 12, No. 3-4, 2005,
pp. 247-261.
|
Click Here |
Click Here |
28. Characterization of flexural properties of syntactic foam core sandwich composites and effect of
change in microballoon radius ratio. Gupta, N. and Woldesenbet, E. Journal of Composite
Materials, Vol. 39, No. 24, 2005, pp. 2197-2212.
|
Click Here |
Click Here |
29. Effect of microballoon radius ratio on syntactic foam core sandwich composites. Woldesenbet, E.,
Gupta, N. and Jerro, H. D. Journal of Sandwich Structures and Materials, Vol. 7, No. 2, 2005,
pp. 95-111.
|
Click Here |
Click Here |
30. Effects of density and strain rate on properties of syntactic foams. Woldesenbet, E., Gupta, N. and
Jadhav, A. Journal of Materials Science, Vol. 40, No. 15, 2005, pp. 4009-4017.
|
Click Here |
Click Here |
31. Microballoon wall thickness effects on properties of syntactic foams. Gupta, N. and Woldesenbet, E.
Journal of Cellular Plasticslastics, Vol. 40, 2004, pp. 461-480.
|
Click Here |
Click Here |
32. Compression properties of syntactic foams: effect of cenosphere radius ratio and specimen aspect
ratio. Gupta, N. Woldesenbet, E. and Mensah P. Composites Part A: Applied Science and
Manufacturing, Vol. 35, No. 1, 2004, pp. 103-111.
|
Click Here |
Click Here |
33. Hygrothermal studies on syntactic foams and compressive strength determination. Gupta, N. and
Woldesenbet, E. Composite Structures, Vol. 61, No. 4, 2003, pp. 311-320.
|
Click Here |
Click Here |
34. Response of syntactic foam core sandwich structured composites to three-point bending. Gupta,
N., Woldesenbet, E., Kishore and Sankaran, S. Journal of Sandwich Structures and Materials, Vol.
4, No. 3, 2002, pp. 249-272.
|
Click Here |
Click Here |
35. Compressive fracture features of syntactic foams – microscopic examination. Gupta, N.,
Woldesenbet, E. and Kishore. Journal of Materials Science, Vol. 37, No. 15, 2002,
pp. 3199-3209.
|
Click Here |
Click Here |
36. Determination of moisture effects on impact properties of composite materials. Woldesenbet, E.,
Gupta, N. and Vinson, J. R. Journal of Materials Science, Vol. 37, No. 13, 2002,
pp. 2693-2698.
|
Click Here |
Click Here |
37. Studies on compressive failure features in syntactic foam material. Gupta, N., Kishore,
Woldesenbet, E. and Sankaran, S. Journal of Materials Science, Vol. 36, No. 18, 2001,
pp. 4485-4491.
|
Click Here |
Click Here |
38. Effect of filler addition on the compressive and impact properties of glass fiber reinforced epoxies.
Gupta, N., Brar, B. S. and Woldesenbet, E. Bulletin of Materials Science, Vol. 24, No. 2, Apr. 2001,
pp. 219-223.
|
Click Here |
Click Here |
39. On the characterization of syntactic foam core sandwich composites for compressive properties.
Gupta, N., Kishore and Sankaran, S. Journal of Reinforced Plastics and Composites, Vol. 18,
No. 14, 1999, pp. 1347-1357.
|
Click Here |
Click Here |
40. Correlation of processing methodology to the physical and mechanical properties of syntactic foams
with and without fibers. Gupta, N., Karthikeyan, C. S.,Sankaran, S. and Kishore. Materials
Characterization, Vol. 43, No. 4, 1999, pp. 271-277.
|
Click Here |
Click Here |
41. On the associated problems of using ultrasonic imaging in characterizing closed cell rigid foam and
their sandwich configurations. Gupta, N., Kishore, Murthy, C. R. L., Dwarkanath, A. and Sankaran,
S. Journal of Non-Destructive Evaluation, Indian Society for Non-Destructive Testing, Vol. 18,
No. 3-4, 1998, 27-3.
|
Click Here |
Click Here |
|
|
|
|
|
|
| |
|
